A residential diving board is a spring-loaded board bolted to a stand at the deep end of a backyard pool, so a swimmer can walk out, push off and enter the water. Most home boards run 6, 8 or 10 feet, are rated near 250 pounds, and are built from a fiberglass-reinforced core under an acrylic, non-slip surface. This guide is about pool boards only, not boat tow boards or scuba sites, both of which flood the search results for the same phrase.
We went through the current listings, the spec sheets and hundreds of buyer reviews across the whole residential category. Six boards cleared the bar. The list is short on purpose. Genuine residential diving boards come from essentially one manufacturer for home use, and most of what shows up beside them in search results is a swim toy, a kickboard or a bag of mounting bolts.
That means the decision is not really about which brand to pick. It is about matching a board to a base you may already own, understanding what the weight limit actually means, and knowing whether your pool is deep enough to make a board worth installing. We break all of that down below, alongside the six boards we would actually put on a shortlist in 2026.
If you are also upgrading the rest of your pool kit, our guides to the best action cameras for diving and the best underwater cameras for scuba diving cover the gear that goes in the water with you.
Top 3 Picks: Best Diving Boards in 2026
Fibre-Dive 8-Foot Board
- Fiberglass construction
- SureFoot non-slip tread
- Stainless hardware
- Retrofits Flyte-Deck II and U-Frame
Frontier III 6-Foot Board
- Fits the widest range of S.R. Smith stands
- Mounting hardware included
- Stainless hardware
- 30 minute install
Frontier III 8-Foot Board
- 8 foot board for family diving
- Stainless corrosion-resistant hardware
- SureFoot non-slip tread
- Retrofit compatible
Best Diving Boards at a Glance in 2026
| Product | Key Specs | Buy |
|---|---|---|
|
|
Check Latest Price |
|
|
Check Latest Price |
|
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
 |
|
Check Latest Price |
1. S.R. Smith Fibre-Dive 8-Foot Replacement Board
S.R. Smith 66-209-268S2-1 Fibre-Dive Replacement Diving Board, 8-Feet, Radiant White
58.3 lb board
94.5 x 17.25 x 2 inch
Fiberglass construction
Stainless hardware included
The Good
- SureFoot non-slip tread for solid foot grip
- Stainless steel corrosion-resistant hardware included
- Drops onto Flyte-Deck II and U-Frame stands
- Best evidenced board in the category by a wide margin
The Bad
- Must be paired with a compatible stand brand
- Pool has to meet minimum size requirements
- Longer board demands more water depth than the 6 foot options
This is the board we come back to. It holds a 4.6 average across 649 reviews, which makes it the single best-documented residential diving board in the category, and the reasons buyers give are remarkably consistent: it feels sturdy underfoot, the tread grips well, and it dropped onto an existing stand without drama.
The construction is straightforward fiberglass with a matching SureFoot tread running the length of the surface. Mounting hardware is stainless steel, which matters more than it sounds if you live near salt water or feed a saltwater pool. Everything you need to bolt it down is in the box, so this is not a purchase that sends you back to the store for a separate hardware kit.
At 58.3 pounds and 94.5 inches long, it is a substantial board. That weight is deliberate. Diving boards work as a cantilever: your weight compresses the spring at the base, the board flexes and stores energy, and that energy releases as you step or jump off the end. More board mass means more stored energy and a longer, softer ride out.
The board is 17.25 inches wide and 2 inches thick, which puts it in the same footprint as the other residential boards here. The spec sheet lists compatibility with Flyte-Deck II and U-Frame style stands, so if your base came from the same manufacturer, fit should be straightforward. If it did not, measure before you commit.
Who this board suits
This suits a family with a deep end, older children and teenagers, and an existing S.R. Smith stand. The 8-foot length gives enough run-up for real diving entries rather than a step-and-drop, and the wide surface gives you room to set up a forward dive instead of only bouncing.
It also suits anyone who is replacing a tired board on a base they want to keep. Because the board is a bolt-on component rather than a full system, you keep your stand, your anchor bolts and your deck work, and only swap the surface you actually stand on.
Who should skip it
Skip it if your pool is short on depth at the dive point. A longer board throws you further, and further means a deeper landing requirement. Manufacturers state plainly that the pool must meet or exceed size requirements for the board, and that warning is not decorative.
Also skip it if you weigh more than the board is rated for, or if you plan to have multiple adults diving in rotation. A 250-pound-rated board is a ceiling for a single user, not a shared attraction for a group of adults.
2. S.R. Smith Frontier III 6-Foot Replacement Board
S.R. Smith 66-209-596S2 Frontier III Replacement Diving Board, 6-Feet, Radiant White
20 lb board
70.5 x 17.25 x 2 inch
Fits the most stand types
Hardware included
The Good
- Retrofit compatible with the widest range of S.R. Smith stands
- Mounting hardware included so no separate kit
- Installs in about 30 minutes on most existing bases
- Strong traction without being harsh on bare feet
The Bad
- Older stands may need spacers that are not included
- Stiff flex rules out springy competition-style diving
- Thin packaging has caused surface damage on arrival for some buyers
The 6-foot Frontier III is the practical pick, and the reason is compatibility rather than raw performance. Reviewers consistently single out the fact that it fits the broadest set of S.R. Smith stands of any board in this lineup, naming the Flyte-Deck II, 606 Cantilever, 656 Supreme, Salt Jump Stand and U-Frame.
That matters because most people buying a residential board are replacing one, not installing a new system. If you inherited a base with the house, or bought a used pool, you may not know exactly what stand you have. A board that works across five stand families removes the single biggest source of purchase anxiety.
At 20 pounds, it is by far the lightest board here, and at 70.5 inches long it is the shortest. That combination makes it the most forgiving board to handle during installation and the easiest to fit under a low deck overhang. It also needs less water depth than the 8-foot models.
The trade-off is feel. Reviewers describe it as a stiff board, which is good news for backyard recreational diving and bad news if you want the springy, springboard-style response that heavy users associate with a top-quality setup. Fewer pounds of board also means less stored energy and a shorter ride out.
Who this board suits
This suits anyone with a mid-size pool, an older stand of uncertain pedigree, or a shorter deck where a longer board simply will not fit. Several reviewers report completing the swap in roughly half an hour on an existing base, with the included hardware doing the whole job.
It is also the safer recommendation for a first board. A 6-foot board on a residential pool of adequate but not generous depth gives you a real diving experience with a smaller demand on water depth than the 8-foot options.
Who should skip it
Skip it if you want a soft, springy rebound for bigger entries, or if multiple adults will use it heavily. A stiff, light board gives you less of the board feel that makes a diving board worth owning.
Watch one detail. Owners with older stands frequently report needing spacers to level the board, and those spacers are not part of the kit. Check the height of your base before ordering so you are not sourcing hardware after the board arrives.
3. S.R. Smith Frontier III 8-Foot Replacement Board
S.R. Smith 66-209-598S2 Frontier III Replacement Diving Board, 8-Feet, Radiant White
63.2 lb board
96 x 18.75 x 2 inch
8 foot length
SureFoot non-slip tread
The Good
- Direct drop-in replacement for older S.R. Smith boards
- Large 8 foot surface suits family diving
- Reported to outlast the boards it replaced
- SureFoot tread for foot safety
The Bad
- Some buyers report the hardware kit missing from the box
- Occasional chip or surface damage on arrival
- Heavier than the 6 foot version and needs more deck clearance
This is the 8-foot counterpart to the Frontier III, and it is the one to pick when you want a longer ride without moving up a product line. It carries a 4.5 average across 184 reviews, with the bulk of feedback describing a straightforward, direct replacement that took about half an hour to fit.
Durability comes up repeatedly. Multiple owners describe it as well made and, in their words, outlasting the predecessors it replaced. For a component exposed to water, sun and the full weight of a person on the end of a cantilever, that is the feature that matters most over a decade of service.
Spec wise it is 63.2 pounds and measures 96 by 18.75 by 2 inches, making it both longer and wider than the 6-foot model. It retrofits the Flyte-Deck II, 608 Cantilever, 658 Supreme, Salt Jump Stand and U-Frame stands, so the stand list runs parallel to the shorter board with the cantilever and Supreme model numbers bumped up.
The stainless steel hardware is rated corrosion resistant, which is the same corrosion resistance you get on the Fibre-Dive and the reason these boards outlast the plain-steel hardware used on older bases. The SureFoot tread matches the board surface for grip under wet feet.
Who this board suits
This suits a family that wants a generous 8-foot surface for forward and twisting dives and already owns a compatible S.R. Smith stand. The extra width over the 6-foot board gives more room to line up a dive rather than a bounce.
It also suits anyone replacing a board that has genuinely reached the end of its life. A tired, delaminated or faded surface is a reason to replace the board, not the base, and this is a direct drop-in for the common S.R. Smith mounted boards.
Who should skip it
Skip it if your deck does not have the clearance for a 96-inch board, or if your pool depth at the dive point is marginal. Longer boards generate more stored energy and throw you further out, which raises the depth you need underneath.
One practical warning: a small number of buyers report the hardware kit arriving separately or not at all, and others mention chips from transit. Inspect the box and the surface the moment it arrives, and check the hardware count before you start.
4. S.R. Smith TrueTread 8-Foot Diving Board
S.R. Smith 66-209-578S2B Diving Board, 8-Foot, Radiant White with Blue TrueTread
70 lb board
8 foot length
Diamond-pattern composite tread
3 year warranty
The Good
- Diamond-pattern composite tread gives a modern look
- Marine-grade surface balances grip and foot comfort
- Hardware included in the box
- Backed by a 3 year warranty
The Bad
- Lowest average rating in the lineup at 4.2
- 13 percent one-star reviews
- Composite surface is a departure from the classic board feel
The TrueTread board is the aesthetic option. Instead of the moulded non-slip surface on the Fibre-Dive and Frontier lines, it carries a marine-grade, diamond-shaped composite tread designed for launching grip. Reviewers like how it looks and how it feels under bare feet, which is the whole point of the design.
It is listed at 70 pounds, the heaviest board in this group, at an 8-foot length. That mass supports a substantial rebound, and the listing positions it for beginners and family use across kids, teens and adults, with hardware included in the box.
The honest wrinkle is the rating. It sits at 4.2 across 69 reviews, the lowest average here, with 72 percent five-star but a heavier 13 percent one-star share than the other boards. The pattern behind the critical reviews is consistent: people who expected the smooth acrylic feel of a traditional board find the composite material a departure from it.
That is a preference problem, not a defect problem. If you like the look and the grip, you will probably rate it highly. If you want the classic board surface, one of the Fibre-Dive or Frontier models is the closer match.
Who this board suits
This suits a pool where appearance matters as much as function, or a household that wants a visibly different board rather than another white acrylic plank. The composite surface resists looking worn and scuffed in a way a moulded surface does not.
It is a fair pick for a new purchase where the base is also new, since the board is compatible with multiple S.R. Smith stands and carries a 3 year warranty.
Who should skip it
Skip it if you are chasing the most heavily reviewed option or the smoothest traditional feel. With 69 reviews, this board has the thinnest evidence base in the lineup, and the split rating tells you opinions are not unanimous.
Also skip it as a heavy-use board for multiple adults. The composite surface looks different from the glass-reinforced core boards, and for repeat high-impact sessions a proven classic construction is the safer bet.
5. S.R. Smith Flyte-Deck II Stand with 6-Foot Fibre-Dive Board
S.R. Smith 68-209-7362 Flyte-Deck II Stand with 6-Foot Fibre Dive Diving Board, White
Board and stand in one package
Salt pool friendly construction
62.9 lb total
All hardware included
The Good
- Only complete board-and-stand package in this lineup
- Saves sourcing a separate stand and hardware
- Salt pool friendly for coastal installations
- SureFoot non-slip tread matched to the board
The Bad
- Fixed 6 foot board length with less mounting adjustability
- Heaviest single item in the lineup at 62.9 pounds
- Salt pool friendly refers to hardware rather than a dedicated salt-rated model
Everything else in this roundup is a board. This is a board and a stand, sold as one kit with the Flyte-Deck II stand and all the hardware needed to install it. If you are starting from bare concrete, that removes the separate stand purchase entirely, which is the main reason to choose it.
Buyers consistently point to convenience as the deciding factor. Rather than tracking down a stand, a board and a hardware kit separately and hoping the bolt patterns agree, you get one package that assembles in a straightforward way. That is genuinely the fastest path to a working diving setup.
The Fibre-Dive board inside carries the same matching SureFoot non-slip tread as the standalone 8-foot board, so you are not settling for a worse surface to get the complete system. The stand is the same Flyte-Deck II platform the replacement boards are designed to retrofit.
Two details stand out. The listing describes the construction as salt pool friendly, which matters for coastal installations where ordinary steel hardware corrodes fast. And the total package weighs 62.9 pounds, so plan the install as a two-person job rather than a solo afternoon.
Who this kit suits
This suits a new installation where you have a proper deck and a stand location already chosen, and you would rather buy one complete system than a board, a stand and hardware from three sources. It is also the simplest answer for a coastal pool where corrosion-resistant hardware is a requirement rather than a preference.
Choose it if you want the shorter 6-foot board anyway. The Fibre-Dive 8-foot board pairs with the same stand family, so buying the 8-foot board separately still gets you a Flyte-Deck II setup.
Who should skip it
Skip it if you already own a working stand. Replacing a good base to get a kit that includes one is money spent twice, and the board alone is the cheaper path.
Also consider the fixed 6-foot length. A kit gives you less mounting adjustability than a bare stand, and a longer board on the same platform is a legitimate upgrade if your depth and deck space allow it.
6. Global Pool Products 8-Foot Sand Replacement Board
Global Pool Products 8′ Sand Diving Board Replacement for Inground Swimming Pools GPP-DB-GX8-S
Rated to hold 250 lb
UV-resistant shell
Laminated solid core
Saltwater friendly
The Good
- Genuine second brand
- so you are not locked into one manufacturer
- Fiberglass core rated to hold 250 lb without losing bounce
- Saltwater friendly and made in the USA
- UV-resistant shell suits full sun exposure
The Bad
- Supplied plastic bolt covers deform when tightened
- No printed installation instructions in the box
- Light packaging has led to chipped corners on arrival
Five of the six boards in this roundup come from one manufacturer, which is the honest reality of the residential category. This is the exception. Global Pool Products builds an 8-foot replacement board with a UV-resistant thermal-formed outer shell, heavy-duty fiberglass reinforcement and a laminated solid core, and it is rated to hold 250 pounds without losing its bounce.
Buyers treat it as a like-for-like replacement for older boards, and several note that hardware was included, which removes the most common surprise on a replacement job. The salt water friendly rating and USA manufacture also make it a reasonable coastal option.
The spec is positioned for moderate to light use on residential and indoor pools, and it lists suitability for sport facilities, resorts and private pools. The board is available in 6-foot and 8-foot lengths in white, sand and grey, so the sand finish here is a colour option rather than a different construction.
It carries 4.3 stars across 32 reviews, with the highest five-star share in this group at 74 percent. That is a small review base, so treat the rating as directional rather than settled evidence.
Who this board suits
This suits a pool owner who wants a genuine alternative to the dominant brand, particularly a coastal or indoor pool owner who wants a board explicitly described as salt water friendly and UV resistant for full sun exposure.
It is also a sensible hedge for anyone whose existing base does not trace to the same manufacturer as their old board. Buying from a different maker gives you a second set of measurements and hardware to work from when matching a retrofit.
Who should skip it
Skip it if you want the deepest evidence base. Thirty-two reviews is a thin foundation, and the five-star share does not make up for the smaller sample when every other board here has two to twenty times the feedback.
Skip it if you are fussy about the small parts. Buyers report the supplied plastic bolt covers deforming when tightened and shredding the platform beneath them, no printed installation instructions in the box, and chipped corners from light packaging. Inspect and replace those covers before first use.
How to Match a Replacement Diving Board to Your Existing Base
Matching a replacement board to an existing base is the question almost nobody answers well online, and it is the one that stops most purchases. You do not need to identify the stand brand to proceed. You need four numbers and a condition check.
First, measure the distance between the centre of each mounting hole on your base. Two-bolt bases commonly sit at 10 inch or 12 inch centres, and three-bolt bases often use a wider 22 inch hole pattern. If your measurement matches nothing you can find, stop and ask the manufacturer before buying.
Second, measure from the back edge of the board to the centre line of the holes, and measure the width of the existing board. A 6-foot board on this list measures 17.25 inches wide, while the 8-foot Frontier III measures 18.75 inches, so a mismatch in width usually signals a different platform generation.
Third, check the weight rating of the base, not just the board. A new 8-foot board in this roundup weighs between 58 and 70 pounds. If the original base was built for a lighter board, the added mass and the leverage it creates are worth confirming with the manufacturer first.
Fourth, inspect the stand itself. Look for rust on the springs and pivot hardware, flat spots or cracks around the anchor points, and any movement at the base plate. Bases fifteen to twenty years old are common in residential yards, and a tired stand is the reason to buy a complete kit rather than a bare board.
Diving Board Safety: Water Depth, Weight Limits and House Rules
Water depth at the dive point is the single factor that decides whether a board is a good idea at all. Depth is measured at the point where the diver enters, not at the deepest part of the pool. A board that launches you out past the drop-off in a shallow-end pool puts you into concrete rather than water.
Longer boards demand more depth because they throw you further. A 6-foot board is more forgiving than an 8-foot board, and an 8-foot board is more forgiving than a 10-foot board, because stored energy scales with board length. Manufacturers state the pool must meet or exceed the size requirements for the specific board, and we would treat that as a hard floor rather than a guideline.
Weight limit means the maximum rated user, not a target. The boards here are rated around 250 pounds, with the Global Pool Products core specifically rated to hold 250 pounds without losing its bounce. If several adults of similar weight will use the board, think of it as a turn-taking feature, not a shared attraction.
Establish house rules before the first session. No running along the board. No diving from the side or the end toward the board. No belly flops, which load the board in a way it is not designed to absorb. No jumping backwards. A board is a spring-loaded lever pointed at a hard surface, and the injuries that happen on them are almost always the result of a technique the board was never rated for.
Finally, respect the deck. Anchor the stand into solid concrete with proper hardware, keep the landing zone clear of obstacles, and follow local rules and your insurance requirements. A board that is not properly anchored is a projectile with a person attached to it.
Why Diving Boards Got Harder to Find
The short answer to the most-searched question about this category is that manufacturers did not stop making diving boards. Residential manufacturing consolidated around S.R. Smith, commercial manufacturing around Duraflex, and the number of distinct models shrank as smaller makers exited the business.
What changed is discoverability. When you search the head term, a large share of the results are not residential pool boards at all. They are swim toys, kickboards, ladder mats, mounting kits and hardware bags. Commercial-grade boards from brands like Duraflex sit in a completely different market with a completely different price structure, so the residential results look thinner than the category actually is.
This is why our shortlist is six boards rather than ten. Padding the list with hardware bags would not make the page longer in any way that helps you. The six products here are the residential pool boards with real review histories behind them.
How to Choose the Best Diving Board for Your Pool
Start with the pool, not the board. Measure the depth at the dive point, measure the deck space available for a stand, and note whether the landing zone is clear. A board that does not fit the water is not a deal, regardless of how good it looks.
Then pick length based on who uses it. A 6-foot board is the forgiving choice and suits younger swimmers and shallower residential pools. An 8-foot board gives a real run-up and a longer, softer rebound, which suits families with teenagers and adults who want to dive rather than bounce. Boards past 10 feet move into commercial territory and are not appropriate for a typical backyard installation.
Construction matters less than most marketing implies. Modern residential boards are overwhelmingly fiberglass-reinforced with an acrylic or composite outer surface. The legacy laminated wood core runners still appear in descriptions of the Fibre-Dive line, and boards with a heavy core tend to hold rebound better over time, but you will not find dramatic performance differences between the mainstream options here.
For coastal and salt water pools, look at hardware first. Corrosion-resistant stainless fasteners are the meaningful difference, and boards described as salt pool friendly are telling you exactly that. A board without corrosion-resistant hardware in a salt water pool is a five-year problem, not a fifteen-year asset.
Above-ground pools are a poor fit and we want to be direct about it. A stand needs a rigid, level, permanently anchored surface, and most above-ground frames do not provide one at the required height or stiffness. If your pool is above ground, the honest answer is that a slide is a better use of the space.
Fiberglass pool shells can take a board, but confirm with the shell manufacturer in writing before you buy. The depth profile matters, and the shell warranty may treat diving differently from ordinary entry. Get the answer before the hardware is on your deck, not after.
Maintenance, Inspection and Diving Board Lifespan
Residential diving boards commonly give ten to fifteen years of service, and the honest driver of replacement is condition rather than the calendar. Heavy-core fiberglass boards that never see commercial-level traffic tend to last longer than light boards in a high-traffic family pool.
Inspect at the start of every season and after any hard impact. Walk the length of the board and look for cracks, especially along the edges and around the mounting holes. Check the tread for worn or smoothed patches where grip has been lost. Look at the surface for delamination, bubbling or a soft spot, which means water has gotten into the core.
Check the hardware. Rust on bolts, a pivot that has developed play, or a spring that no longer returns the board to level all mean the mechanism is degrading. Replace the board immediately rather than at season end if you see cracking, delamination, lost traction or a base that will not hold level. None of those wait for a convenient month.
For salt water pools, rinse the board and stand with fresh water after heavy use and check stainless hardware for surface corrosion each season. For winter, leaving the board installed is generally fine; the bigger risk is a cover or a tarp pressing on the surface and deforming the tread.
Frequently Asked Questions
Why did they stop making diving boards?
They largely did not stop. Residential diving board manufacturing consolidated around S.R. Smith, while Duraflex covers the commercial market, and smaller makers exited over time, so the number of distinct models shrank. The category also looks emptier than it is because search results mix in swim toys, kickboards and mounting hardware rather than actual residential pool boards.
What is the lifespan of a diving board?
Residential diving boards commonly last ten to fifteen years when they see family-level traffic. The real replacement triggers are condition, not the calendar: cracks along the edges or around mounting holes, delamination or soft spots where water has entered the core, tread worn smooth, or a spring and pivot that no longer return the board to level.
What type of wood is best for a diving board?
Wood is no longer the deciding factor. Modern residential boards are mainly fiberglass-reinforced with an acrylic or composite outer surface, and laminated wood core runners survive as a legacy construction still referenced in the Fibre-Dive line. What matters more today is core mass, corrosion-resistant stainless hardware and whether the tread still grips wet feet.
How much weight can a diving board support?
Most residential boards are rated for about 250 pounds, and the Global Pool Products core here is specifically rated to hold that weight without losing its bounce. Treat the rating as a ceiling for a single user, not a shared capacity. If several adults of similar weight will dive, rotate them rather than allowing concurrent use.
How deep does a pool need to be for a diving board?
Depth is measured at the dive point where the diver enters, not at the deepest part of the pool. Longer boards launch you further, so an 8-foot board needs more depth than a 6-foot board. Manufacturers require the pool to meet or exceed size requirements for the specific board, so treat that as a hard floor before you buy.
Can a fiberglass pool have a diving board?
It is technically possible, but it depends on the depth profile and the shell manufacturer warranty. Contact the pool manufacturer in writing before installing anything, because the depth at the dive point and the shell warranty terms both bear on diving. Get the answer before the stand is anchored to your deck.
How do I know what diving board fits my stand?
Measure the distance between the centre of each mounting hole on your base. Two-bolt bases commonly use 10 inch or 12 inch centres, and three-bolt bases often use a wider 22 inch hole pattern. Also measure board width and the distance from the back edge to the hole centre line, and confirm the base weight rating covers a heavier replacement board.
Is a diving board worth it for a home pool?
It is worth it for a family with a deep end, children old enough to follow the rules, and a deck that can take a properly anchored stand. It is poor value for a shallow pool, an above-ground frame, or an all-adult household that will use it rarely. Weigh the water depth requirement and the liability of a hard deck edge before deciding.
The Best Diving Board for Your Pool
If you want one answer, take the S.R. Smith Fibre-Dive 8-Foot Replacement Board. It has the deepest evidence base in the category at 4.6 stars across 649 reviews, stainless hardware that will not corrode out from under you, and a retrofit path onto the two most common home stands.
Pick the Frontier III 6-Foot instead if your pool depth is modest, your stand is of uncertain origin, or the 6-foot board fits your deck and the 8-foot one does not. Pick the Frontier III 8-Foot if you want the longer ride at the same product line. Pick the Flyte-Deck II kit if you have no stand at all, and the Global Pool Products board if you want a manufacturer other than the dominant one.
Before any of them, do the measuring. Bolt centres, board width, the distance from the back edge to the holes, and the depth of the water at the dive point decide whether a board is a good decision or an expensive mistake.
Those are the best diving boards for residential pools in 2026, based on the spec sheets, the compatibility data and the buyer feedback available right now. Check the listing details against your base measurements, confirm your pool meets the size requirements, and then get out there and use it properly.